天然气液压增压冲孔机预压力2000N

Gas Hydraulic Supercharged Punching Machine / Instrument / Equipment / Apparatus / Device

The pneumatic hydraulic press type punching machine is a multifunctional special equipment. A gas-liquid booster cylinder system is used. Suitable for blanking and pressing for metal, non-metallic materials, The machine is easy, quick and labor-saving, and has good stability.

Technical Specification

• Working gas source pressure: 0.4-0.8Mpa
• Pre-pressing force: 2000N
• Boost output: 10000N
• Maximum punching thickness: 12mm
• Punch diameter: 80mm
• Punching stroke: 40mm
• Workbench size: 260mm*280mm
• 尺寸：340mm * 300mm * 700mm

在冲压过程中，在将橡胶化合物放置后，请勿调节橡胶材料的位置，并且不会将手放在冲床下以避免事故。

• Turn on the power. Connect the gas source to the machine and work when the pressure is expressed to 0.4-0.8Mpa.
• Put the required cutting tool such as the cutter into the punch connecting hole, lock the tool, and place the sample or the test piece on the work surface made of plastic plate. A yellow cardboard or magazine is placed on the table to help cut and protect the cutting edge from damage.
• Press the red “power switch” to turn on the power.
• Press the “Preload Increase and Decrease Switch” to pressurize, the punch falls, and the sample is punched.
• Press the “supercharge increase/decrease switch” to increase the press pressure.
• At this time, complete the stamping, press the “supercharge increase/decrease switch” to reduce the pressure, and then press the “pre-pressure increase/decrease switch” to lift the punch, that is, complete a stamping, and the sample can be taken out.
• Regularly refuel the pressure reducing valve.
• Apply dustproof cover after use to prevent oil and dust from entering.
• 冲压样品时，请务必在样品下放置纸板或塑料板。